Make
the wires as short as possible so you get no problems when
you put the PS2 together again, also with too long wires you
might get timing problems, even these problems should have
been fixed with the latest update of the Apple.
We
recommend to use for GND (point 0) and +3.3 Volt (point 10)
a little bit stronger wire.
There
are three relative similar boards:
SCPH-30001
GH-004
SCPH-30001 GH-005
SCPH-30001 GH-006
And
the older Version 4 Boards
SCPH-30001
Version 4 Bios version 030 no gap
SCPH-30001 Version 4 Bios version
030 gap
